top of page
08-MOULD-WASH-CONCENTRATE-no-brush--vert

Heyen Anti-Mould Anti-Condensation Wash Concentrate

Description:
Used as a pre-wash to cleanse surfaces before application of Anti-mould and Anti-condensation coatings as well as a general biocidal cleaner.
Recommended Use:
Pre-wash to cleanse surfaces before application of Anti-mould and Anti-condensation coatings. General biocidal cleaner.
 
Item Number: 12345
Weight: 0.25kg
£12.24   In Stock
Overview:
A concentrated fungicidal cleaner and surface biocide for domestic and commercial use against mould fungi, mildew and algae on internal and external surfaces such as masonry, tiles, wood and painted surfaces.
Heyen's Mould Wash Concentrate is approved under the Control of Pesticides Regulations 1986 for use as directed (HSE No.7676)
​
Application:
After dilution, it should be used to was down the surface, using a sponge, scrubbing brush or cloth. Allow to dry thoroughly, apply a second wash to badly soiled areas.
​
Drying Time:
Normally 1-4 hours
​
Dilution & Coverage:
A concentrated formulation for dilution ( 1 part concentrate to 19 parts water by volume)  The concentrate contains 10% w/w Quaternary Ammonium Halide dissolved in water.
When diluted and depending on the porosity of the surface the coverage rate is 6 - 8 sq metres per Litre of product.
​
Sizes:
250mls concentrate makes 5 Litres ready to use.
​
Heyen Mould Wash Concentrate TDS
For more information and technical assistance, please call 07801 927519
bottom of page